Cortec VpCI® 414 19Ltr Pail Drums | Cleaner & Degreaser For Removing Temporary Coatings

Cortec VpCI-414 is a high-performance, water-based, and biodegradable cleaner and degreaser. Its main job is to effectively remove various contaminants like light oils, greases, dirt, and even temporary protective coatings from metal and painted surfaces, all while offering integrated corrosion protection.

Yes, it's designed with environmental responsibility in mind; it's water-based and biodegradable. This formulation is non-flammable and generally doesn't require extensive personal protective equipment for application, making it safer for both the environment and those using it.

What truly sets Cortec VpCI-414 apart is its dual action: it not only cleans and degreases effectively but also provides multi-metal corrosion protection after the cleaning process, preventing flash rust and offering short-term preservation. This eliminates the need for a separate corrosion inhibitor step.

Absolutely. This versatile cleaner is formulated to protect a broad range of metals including carbon steel, stainless steel, galvanized steel, cast iron, copper, and brass (with less than 30% zinc), ensuring it's a go-to solution for many metal cleaning tasks.

Before applying Cortec VpCI-414, it's best to ensure the surface is clear of any loose debris or excessively thick layers of contaminants that could hinder the cleaner's effectiveness. While it's a powerful degreaser, a quick brush-off of heavy dirt can improve results.

Relevant products you may want to consider:

• Cortec VpCI-417 Heavy-Duty Cleaner/Degreaser
• Cortec EcoLine Cleaner/Degreaser

The dilution ratio depends on the cleaning intensity needed: for light cleaning, mix 50ml per litre (5% dosage); for medium cleaning, use 100ml per litre (10% dosage); for heavy cleaning, it's 200ml per litre (20% dosage); and for coating removal, a higher concentration of 600ml per litre (60% dosage) is recommended.

For optimal results, Cortec VpCI-414 is best applied by spraying, either at full strength or as a diluted mix, using an airless or pump-type sprayer. Immersion or dipping tanks can also be used, especially for smaller parts.

After applying the cleaner, it's generally recommended to let the product stand wet on the surface for approximately 15 minutes. For heavier films or coatings that have cured for a longer time, a longer dwell time may be beneficial, and reapplication might be necessary.

To remove the cleaner and the dissolved contaminants, a power washer set between 50-300 psi (3.4-21 bar) with water temperatures ranging from 115° to 160°F (46°-71°C) is ideal. However, for many applications, a common garden hose and nozzle can also be sufficient.

One of the practical benefits of Cortec VpCI-414 is its effectiveness at room temperature, which helps reduce energy consumption. However, for extremely heavy hydrocarbons or very stubborn residual coatings, using it in a heated bath can enhance its cleaning power.

Relevant products you may want to consider:

• Cortec VpCI-419 Heavy Duty Degreaser Cleaner
• Cortec VpCI-418 L/LM Cleaner Degreaser
• Cortec VpCI-416 Water-Based Cleaner Degreaser

While it's typically rinsed off after cleaning, Cortec VpCI-414 is designed to remain active and continue providing corrosion protection even if some residue is left to dry, which is a significant advantage for temporary protection.

Cortec VpCI-414 is specifically formulated to be a heavy-duty temporary coating remover. It’s highly effective at dissolving substances like Cosmoline™, Cortec VpCI 368, VpCI 388, VpCI 389, and other non-silicone-based wax coatings from various surfaces.

Absolutely. Its ability to thoroughly clean and degrease, while also providing a short-term corrosion inhibiting layer, makes it an excellent choice for surface preparation, ensuring a clean and protected base for subsequent coatings.

Yes, it's highly effective for machinery maintenance. It can tackle light oils, greases, and general grime on industrial equipment, ensuring parts are clean and protected from flash corrosion after the cleaning process.

Given its effectiveness on oils, greases, and various metals including steel and cast iron, Cortec VpCI-414 is well-suited for cleaning automotive components and general workshop maintenance.

Relevant products you may want to consider:

• Cortec EcoLine ELP Penetrating Lubricant Spray
• Cortec CorShield VpCI-369
• Cortec VpCI-325 Corrosion Protection Liquid

It's quite effective at removing light to medium oil and grease, as well as more stubborn, cosmoline-like products. Its viscous nature helps it cling to soiled surfaces, allowing it to penetrate and lift contaminants.

Yes, a key benefit is that Cortec VpCI-414 is designed not to affect or damage painted surfaces, which broadens its applicability for cleaning various industrial and commercial equipment.

Due to its viscous liquid formulation, Cortec VpCI-414 has excellent clinging properties, making it particularly effective for cleaning ceilings, vertical surfaces, and even under-hanging areas, ensuring good contact time with contaminants.

Cortec VpCI-414 incorporates VpCI® (Vapor Phase Corrosion Inhibitor) technology. This means that after cleaning, it leaves a protective layer on the metal surface and also releases VpCI molecules into the air, protecting both in solution and above the liquid line.

It provides a significant period of corrosion protection, typically up to 48 hours, after the parts have been cleaned. This temporary protection is crucial for preventing flash rust and safeguarding metals during subsequent handling or temporary storage.

Relevant products you may want to consider:

• Cortec VpCI-377 Rust Preventative
• Cortec BioCorr Biodegradable Rust Preventative

Yes, its integrated VpCI technology is specifically designed to prevent flash rust, which is the rapid corrosion that can occur on clean metal surfaces immediately after being exposed to water or humidity.

Absolutely. The inherent corrosion protection it provides makes it ideal for components that will be temporarily stored after cleaning, offering a vital layer of defense against rust and oxidation until further steps are taken.

Cortec VpCI-414 has a reliable shelf life of two years when stored correctly, ensuring its effectiveness over a good period.

Relevant products you may want to consider:

• Cortec VpCI-414 Cleaner/Degreaser (Aerosol Cans)
• Cortec EcoLine ELP (19ltr Pail/Drums)

To maintain its quality and efficacy, it should be stored within a temperature range of 32°F (0°C) as a minimum and 120°F (49°C) as a maximum.

Cortec VpCI-414 is available in practical 5-gallon (19 litre) pails and larger 55-gallon (208 litre) drums to suit various industrial needs. For smaller applications, it's also available in 400ml EcoAir® aerosol spray cans.

Cortec VpCI-414 is primarily a concentrate, allowing for flexible dilution ratios based on the severity of the cleaning task. However, it can also be used at full strength for the most demanding applications.

The product is designed to be user-friendly; it's water-based and typically has a mild or no discernible strong chemical odor, which is a benefit in enclosed industrial environments.

Relevant products you may want to consider:

• Cortec VpCI-423 EcoAir (Biodegradable Rust Removal Spray)
• Cortec VpCI-337 EcoAir (Aerosol Cans)
• Cortec BioCorr EcoAir Anti-Rust Coating Spray
• Cortec VpCI-377 EcoAir (Aerosol Cans)

By combining cleaning and corrosion protection in one step, Cortec VpCI-414 reduces the need for multiple products and processes, saving time, labor, and inventory costs. Its effectiveness at low concentrations also contributes to economical usage.

Yes, by ensuring thorough cleaning and providing immediate corrosion protection, it helps to maintain the integrity of metal surfaces, extending the lifespan of machinery and components by preventing the onset of rust and degradation.

Its proven performance in removing tough contaminants, coupled with its unique ability to provide temporary corrosion protection for multiple metals, makes it a highly reliable and efficient solution for demanding industrial cleaning and surface preparation tasks.